Skip to content

Electricity Class 10 Notes: Formulas, Circuits and Solved Numericals

विद्युत कक्षा 10 नोट्स: सूत्र, परिपथ और हल न्यूमेरिकल

Electricity class 10 notes with all key formulas, Ohm's law, series and parallel circuits, the heating effect and solved numericals.

On this page ·  इस पेज पर
  1. Key Takeaways
  2. Electric Current and Potential Difference
  3. Circuit Diagram Symbols
  4. Ohm’s Law
  5. Factors That Affect Resistance
  6. Resistors in Series
  7. Resistors in Parallel
  8. Heating Effect of Electric Current
  9. Electric Power and Energy
  10. Steps to Solve Electricity Numericals
  11. Common Mistakes in Electricity Questions
  12. How to Revise This Chapter
  13. FAQs on Electricity Class 10 Notes
  14. Wrap-Up

These electricity class 10 notes cover current, potential difference, Ohm’s law, resistance, circuits and the heating effect of current. The chapter is formula-heavy, so it gives many numerical marks in the board exam. First, learn the definitions and units. Then practise the circuit rules, because most numericals combine a few simple formulas.

Electric Current and Potential Difference

Electric charge flows through a conductor to form a current. The current is the charge that passes a point in one second, so I = Q/t. The SI unit of current is the ampere (A), and 1 A means 1 coulomb of charge per second. An ammeter measures it, and you connect it in series.

Electrons carry the charge in a metal, and each has a charge of 1.6 × 10⁻¹⁹ C. By convention, however, the current flows from the positive terminal to the negative terminal. Therefore, the direction of conventional current is opposite to the motion of electrons.

Potential difference between two points is the work done to move a unit charge between them, so V = W/Q. Its unit is the volt (V). A voltmeter measures it, and you connect it in parallel across the component.

Circuit Diagram Symbols

A circuit diagram uses standard symbols for the cell, battery, switch, bulb, resistor, rheostat, ammeter and voltmeter. A battery is a combination of cells. Meanwhile, a rheostat is a variable resistor, and it changes the current without changing the voltage of the source. Learn these symbols well, because the board asks you to draw circuits.

Ohm’s Law

Georg Simon Ohm found that, at constant temperature, the current through a conductor is directly proportional to the potential difference across it. Therefore, V ∝ I, and V = IR. Here, R is the resistance, and its unit is the ohm (Ω).

A graph of V against I for a metallic conductor is a straight line through the origin. Its slope gives the resistance. Also, 1 ohm is the resistance when a potential difference of 1 volt drives a current of 1 ampere.

Factors That Affect Resistance

Resistance depends on three things. It grows with the length of the conductor, and it falls as the area of cross-section grows. It also depends on the material. The formula is R = ρl/A, where ρ is the resistivity, and its unit is the ohm-metre (Ω m).

Resistivity is a property of the material, and it does not depend on the shape of the wire. Metals and alloys have low resistivity, so they conduct well. Insulators such as rubber and glass have very high resistivity. Alloys such as nichrome have higher resistivity than pure metals, and they do not oxidise easily at high temperature. For this reason, heating elements use nichrome. Similarly, tungsten has a very high melting point, so bulb filaments use it.

Resistors in Series

In a series circuit, the same current passes through every resistor, but the potential difference divides among them. The total resistance is R = R₁ + R₂ + R₃. As a result, the total resistance is larger than any single resistor.

Example 1. Resistors of 2 Ω, 3 Ω and 5 Ω are in series with a 10 V battery. Find the current.

R = 2 + 3 + 5 = 10 Ω. Then I = V/R = 10/10 = 1 A.

Resistors in Parallel

In a parallel circuit, the same potential difference acts across every resistor, but the current divides among them. The total resistance follows 1/R = 1/R₁ + 1/R₂ + 1/R₃. Consequently, the total resistance is smaller than the smallest resistor.

Example 2. Resistors of 6 Ω and 3 Ω are in parallel. Find the total resistance.

1/R = 1/6 + 1/3 = 1/6 + 2/6 = 3/6, so R = 2 Ω.

Household circuits use parallel connections. Because of this, each appliance gets the full voltage, and one appliance can fail without stopping the rest.

Heating Effect of Electric Current

When current flows through a resistor, the resistor becomes hot, because electrical energy turns into heat. Joule’s law gives the heat produced: H = I²Rt. Using Ohm’s law, you can also write H = VIt = V²t/R.

This effect helps in electric heaters, irons, toasters and bulbs. In a bulb, the filament gets so hot that it glows. A fuse also depends on the heating effect. A fuse wire has a low melting point, so it melts and breaks the circuit when the current is too high. Thus, it protects appliances.

Electric Power and Energy

Power is the rate at which a device uses energy, so P = W/t = VI. Using Ohm’s law, P = I²R = V²/R. The SI unit of power is the watt (W), and 1 W = 1 volt × 1 ampere.

The SI unit of energy is the joule. In daily life, however, we use the kilowatt-hour (kWh), which is called a unit of electricity. One kWh equals 3.6 × 10⁶ J. To find the energy, multiply the power in kilowatts by the time in hours.

Example 3. An electric bulb of 100 W works for 5 hours every day. Find the energy used in 30 days, and the cost at ₹6 per unit.

Power = 0.1 kW, and time = 5 × 30 = 150 h. So energy = 0.1 × 150 = 15 kWh. Cost = 15 × 6 = ₹90.

Steps to Solve Electricity Numericals

  • First, write the given values with their units.
  • Next, choose the formula that connects the quantities you know to the unknown.
  • Then convert units where needed, such as minutes to seconds and watts to kilowatts.
  • Finally, substitute the values, calculate and write the answer with its unit.

Common Mistakes in Electricity Questions

  • Students connect the ammeter in parallel, but it must go in series.
  • Many add reciprocals incorrectly, so check that the parallel resistance comes out smaller.
  • Some forget to convert hours and watts when they calculate kWh.
  • Others call the unit of resistivity the ohm, although it is the ohm-metre.

How to Revise This Chapter

Start with the list of formulas and units on one page. Next, draw the series and parallel circuits and solve two numericals for each. After that, practise the heating and power problems. Finally, attempt all NCERT questions. For related science, read control and coordination class 10 notes and life processes class 10 notes. You can also browse the Class 10 Science category, the Class 10 notes hub and class 12 physics notes for a later look at current electricity.

FAQs on Electricity Class 10 Notes

What is Ohm's law?

Ohm's law states that, at constant temperature, the current through a conductor is proportional to the potential difference across it, so V = IR.

What is the SI unit of resistance?

The SI unit of resistance is the ohm (Ω). One ohm is the resistance when 1 volt drives 1 ampere of current.

What factors affect the resistance of a conductor?

Resistance depends on the length, the area of cross-section and the material of the conductor, as R = ρl/A. It also changes with temperature.

Why do we connect household appliances in parallel?

In parallel, each appliance gets the full voltage, and each one can work on its own. If one fails, the others keep working.

More Questions About Electricity Class 10 Notes

What is the formula for electric power?

Electric power is P = VI. Using Ohm's law, it also equals I²R and V²/R, and its unit is the watt.

What is a kilowatt-hour?

A kilowatt-hour is the energy used by a 1 kW device in 1 hour. It equals 3.6 × 10⁶ joules and is the commercial unit of electrical energy.

Why does a fuse protect appliances?

A fuse wire has a low melting point. When the current is too high, the wire heats up, melts and breaks the circuit.

Wrap-Up

Electricity class 10 notes work best when you pair every formula with a solved numerical. Keep the units on one page, and practise series and parallel circuits daily. Then continue with the Class 10 Science category, or return to the The Note homepage.

Related · संबंधित

About the author

Deep Narayan is a dedicated educator, curriculum specialist, and author with over 15 years of experience shaping modern classrooms. Known for a student-centric approach to learning, he specializes in breaking down complex concepts into engaging, accessible, and actionable content for today's learners.

Meet the team · Corrections policy

Report a mistake · गलती बताएँ